Rotary Bottle Uv Printer

1. The AI ​​scanner uses high-precision sensors to quickly identify the surface characteristics of the printing material, automatically adjust the nozzle height and printing path, and avoid ink flying or misalignment caused by uneven materials.

1. When the print head is about to touch an obstacle, the system automatically lifts the print head and moves it back to a safe area to avoid scratching the print head or damaging the material.

1. Use a special cleaning fluid to flush the inside of the nozzle in reverse order to dissolve the remaining solidified ink or impurities. After cleaning, the nozzle will be automatically covered with moisturizing fluid to prevent dryness and clogging.

1. Independently protect different functional modules (such as UV lamp power supply, stepper motor, and nozzle circuit) to prevent a single fault from causing the entire machine to be paralyzed.

1. Built-in anti-backflow valve to prevent ink from flowing back and drying up the nozzle when the machine is stopped. When the machine is on standby, a small amount of ink will automatically circulate to clean the pipeline to avoid blockage due to precipitation or solidification.

1. The bending rigidity of the integrated beam is 40% higher than that of the spliced ​​type. When the Y-axis moves at high speed, the vibration amplitude of the print head is reduced from ±5μm to ±1μm, ensuring that the 1200dpi ultra-fine pattern has no ghosting.