Please pay attention to the following dangerous operations when using UV printers

UV printer has the characteristics of printing and drying without making a plate. It can not only print ordinary effects, but also 3D and relief effects. It also prints a wide range of materials: packaging boxes, acrylic, KT boards, U disks, glass, tiles, wood, metal After the advent, UV printers have become a trend while rapidly occupying the market. UV printers are very strict during use. Improper operation will damage the life of the equipment. Please pay attention to the following dangerous operations.

1. Adjust the nozzle by brute force

Use external force to adjust the nozzle position irregularly. Do not use brute force whether to replace or fine-tune the print head. Please treat the print head carefully in accordance with the specifications.

2. Ignore the working ground

UV printer printing is greatly affected by static electricity, so you should always check the connection of the ground wire equipment, and regularly sprinkle a little salt water around the ground wire.

3. Switch the circuit at will

Install and remove the UV flatbed printer circuit at will without turning off the power and turning off the main power supply. This behavior harms the service life of each system and endangers the sprinkler.

4. Cleaning without turning off the power

Do not pay attention to protecting the circuit board and other internal systems during cleaning. Please turn off the power when cleaning, and be careful not to let water hit the circuit board and other internal systems.

5. Use inferior cleaning fluid

Use inferior cleaning fluid to clean the nozzle. The nozzle is very easy to be contaminated and worn, so please use the manufacturer's product and the product that has passed the quality inspection to clean the nozzle.