Repair and maintenance methods of UV purple light machine

1. In the process of using the uv purple light machine, if the mechanical operation system and electrical control system fail, find equipment maintenance and electricians to repair it. Non-specialized personnel should not dismantle or move indiscriminately to avoid accidents and damage to the device.

2. Maintenance requirements: In order to prolong the service life of the machine, ensure the normal movement of the equipment and ensure the processing quality of the product, the maintenance personnel and the operator should cooperate to achieve the following points:

(1) Before starting the machine, please check the equipment for any abnormalities. If there are any abnormalities, please contact the maintenance personnel in time to eliminate them and then work. (2) Regularly check the running condition of rotating components, and adjust and repair in time if abnormalities are found.

(3) After the operation is completed, clean and inspect the machine for residual dirt in time. Do not rinse the machine body and work site with water. Beware of moisture, damage, and electric shock to electrical appliances. It is a good moisturizing effect, a toner with a good moisturizing effect, a lotion, a makeup remover, L-carnitine, which brand is good, bb cream, and what brand of dark eye cream is easy to use.

(4) The UV curing machine has a high-pressure steady flow device. The operator must wear insulating shoes or put an insulating plate on the ground to prevent accidents.

(5) Wipe the UV lamp and reflector regularly. After the lamp is aging, replace the lamp in time to ensure normal production.

(6) Carry out overhaul at least once a year, remove all transmission components, perform thorough cleaning and refill with lubricant, and make sure that there is a lubricating fit between the rotating parts when assembling the transmission components.