The heavier the uv flatbed printer, the better?

Is it reliable to judge the performance of uv flatbed printers by weight? the answer is negative. This is actually taking advantage of the misunderstanding that most people judge quality by weight. Here are a few misunderstandings that can be understood.

       Misunderstanding 1: The heavier the UV flatbed printer, the better the quality

       In fact, it is easy to increase the weight of the uv flatbed printer, but it is difficult to reduce the weight. Regardless of the aesthetic design and cost saving, the accessories and parts used in the negative pressure system, water cooling system, suction system, etc. can easily add 200-300 kg. However, if the performance is kept unchanged and the volume is reduced by half, the price will at least be doubled, and some accessories will be doubled. Under normal circumstances, the larger and heavier parts have higher energy consumption, heavier noise pollution, and more troublesome later maintenance.

        Misunderstanding 2: The heavier the UV flatbed printer, the higher the stability

        The stability of the physical structure of the uv flatbed printer is determined by factors such as the design level of the manufacturer, the quality of the parts used, and the level of its own production technology. The weight factor is very, very small. Regardless of cost, using carbon fiber composite materials, alloys, etc., the overall weight of the equipment can be reduced by at least 40%.

       Misunderstanding 3: The heavier the UV flatbed printer, the longer the service life

       This is totally unmatched. The service life of the uv flatbed printer depends on the maintenance of the operator, the quality of the equipment's accessories, and it has nothing to do with the weight.

       But why do some uv flatbed printer manufacturers like to make the machine heavier and heavier?

       1. Marketing needs

       The heavier it can reflect the manufacturer's solid workmanship, allowing users to see such a large machine with such a heavy weight through their eyes, and certainly not at a loss at this price; it is convenient for sales staff to package and promote the parts and performance of the machine.

       2. Need for cost saving

       Under the premise of ensuring performance, if the volume is reduced and the energy consumption is reduced, the rigid production cost will be a lot higher, which will reduce the original profit and suffer a loss in the market price competition.

       3. Technical limit

      Considering that the technical level of the engineering department of different uv printer manufacturers is different, and some of the levels are average or poor, it is indeed impossible to better optimize the physical structure.