How To Clean And Maintain The Nozzle Of UV Flatbed Printer In Daily Life?

UV flatbed printers are also called uv printers and universal printers, which can print in a wide range. UV flatbed printers use inkjet technology. The importance of natural nozzles is self-evident. If the nozzles are not maintained and cleaned for a long time, they are easily damaged. How do we clean and maintain the nozzles of universal UV printers in our daily lives?

The first step: soaking. Prepare a small flat plate, place the nozzle flat in the plate, and then pour the cleaning solution for universal printer into the plate, the depth is based on the nozzle part just immersed. Be careful not to splash water on the cable plug and drive circuit board. The first soaking time is about one hour.

The second step: nozzle injection pressure flushing. Use a plastic tube of a disposable infusion set, one end is inserted into the 5ml syringe, the other end is inserted into the nozzle ink inlet hole that needs to be flushed, press the distilled water in the syringe into the nozzle, pay attention to the pressure not to be too large, so as not to squeeze the water. The waterproof isolation glue inside the nozzle is broken.

This process needs to be repeated many times until you see a thin water column spraying out from each ink outlet. In this way, the clogged nozzle is cleaned and dredged.