Precautions For Nozzle Disassembly And Assembly

The nozzle of the UV printer is one of the important parts, and it is also a place where problems are prone to occur. If the nozzle fails, we need to clean it according to the situation and pay attention to maintenance in daily work. This will involve the disassembly and assembly of the nozzle. However, do not be reckless when removing the nozzle, otherwise the nozzle will be damaged. Here, I want to talk about several issues that need to be paid attention to when disassembling the nozzle.

uv printer.

1. Since the surface of the nozzle of the UV flat printer is made of aluminum alloy plate, the inner layer covers the small ink tube and the crystal oscillator, which is very fragile and will not be touched. Once the deformation is triggered, it becomes concave or even ruptured, and the nozzle ruptures and needs to be replaced.

2. Also pay attention to the installation of the nozzle of the flatbed printer. Before installing the nozzle, turn off the machine and turn off the power. After installation, gently push the car to the left and right with your hands to check whether the car runs smoothly, and start the machine after powering on. Before the installation is completed, be careful not to turn on the electric car immediately. Because if the sprinkler is not installed and the car moves, the sprinkler will be damaged or damaged. The hands feel stretched and placed freely, with strong controllability. Therefore, manual testing is required first.

3. When inserting the universal printer head cable, do not carry ink. make sure

Make good contact with the socket, do not touch the feet. Otherwise, the nozzle may short-circuit and burn.