Uv Flatbed Printer Fault Solution

There are many kinds of uv flatbed printer accessories. Once a certain accessory has a problem, it will affect the entire product printing process. The failures of uv flatbed printer accessories mainly include broken water pipes, damaged button switches, etc. These failures can be displayed intuitively through external performance, and the treatment method is to directly replace the new accessories.

1. The water pipe of the uv flatbed printer is broken.

A. Long-term wear and tear, the solution: plastic water pipes will inevitably wear out after long-term use, just replace them with new ones;

B. Freezing and cracking, the temperature is too cold, and the water pipe will be frozen and cracked when it is placed on the ground. Solution: Replace with new water pipes, install air conditioning in the workshop, and provide heating;

C. Puncture injury, solution: inadvertently being pierced by sharp objects in daily life causes the water pipe to rupture, just replace it with a new water pipe;

2. The button switch of the uv flatbed printer is damaged.

A. The LED button switch is damaged, the solution: just replace it with a new LED button switch;

B. The suction button switch is damaged, the solution: replace with a new suction button switch;

C. The nozzle button switch is damaged, the solution: replace the nozzle button switch with a new one;