DTF Printer A3

1. The platform adopts servo motor drive + linear guide (repeat positioning accuracy ±0.01mm), supports multi-pass printing of the nozzle (such as 8Pass mode), and achieves 1440dpi ultra-high resolution.

1. When the printer is idle, the capping station will lift and cover the print head to prevent the ink from drying or clogging.

2. Keep the print head moist through a closed environment to extend the life of the nozzle.

1. The integrated body integrates the print head, ink system, drying device, etc. into one device, reducing the footprint of the device and making it suitable for work environments with limited space.

1. The power button controls the start and stop of the device.

2. Use the arrow keys or touch screen to enter the submenus such as settings, calibration, and maintenance.

1. By adjusting the vibration frequency and amplitude, the hot melt powder (such as TPU powder) is evenly covered on the surface of the printed film pattern to avoid local accumulation or missing.

1. After shaking the powder (spreading hot melt powder) and pre-drying, the processed DTF film is automatically rolled or stacked to avoid powder contamination or film wrinkles caused by manual operation.