Classification Of UV Printer Coatings

Metal coating

CP: metal type, dry a little faster; spraying requirements, thick surface, otherwise it will fall off easily;

DY: Metals and ceramics, slower drying than CP; suitable for aluminum, copper plate, tinplate, aluminum alloy and other materials can also be used in ceramic tiles, tempered glass, need special treatment, respectively, transparent and white, both Make bright and matte effect. The main reason is the smoothness of the surface. If the ceramic is smoother than glass, use DY.

ABS coating

CU, ABS vials: Acrylic, plastic, bamboo and wood. Pay attention to whether the surface is burnt. There are many kinds of ABS materials, suitable for wooden boards, PVC, ABS, gypsum board, thickened kraft paper, acrylic, PS, PVC, ordinary plastics, etc., there are two kinds of transparent and white, can be used for bright With matte effect.

Leather coating

It is suitable for leather, leather, PVC leather, PU leather, etc. There are two kinds of transparent and white, which can be used for gloss and matte effect.

Silicone coating

Suitable for silicone and rubber materials. The surface activity is poor, flame treatment is required, otherwise the adhesion is not enough, flame treatment, according to experience, the surface should not be sprayed too thick, otherwise it is not easy to dry, and the specific details of the operation are provided to the customer.

Glass coating

PL: It is suitable for organic glass, tempered glass, ceramics, ceramic tiles, crystal, and needs special treatment. There are two kinds of transparent and white, which can be used for bright and matte effects. The boiling water resistance requirements are higher, usually with white oil, the adhesion is very important, the white oil should not be too strong, otherwise it is easy to dissolve the pattern, it is best to spray twice.

PC coating

PC is a hard material, and the adhesion is usually not easy to pass. It is suitable for a class of materials beginning with P, PS, PP, PVC and so on.