How To Maintain UV Flatbed Printer In Summer?

The summer of 2021 has come, how the uv flatbed printer can be used normally in the summer will not affect the daily printing and processing. Then you need to master the special maintenance skills in summer, with fewer equipment failures, so you can save more money and reduce additional maintenance costs.

　　 Five ways to maintain UV flatbed printers in summer:

　　 Method one, temperature control. The uv flatbed printer should be placed in a cool, backlit corner to avoid high temperature and direct sunlight. The suitable indoor temperature is 19℃～32℃, and the humidity is 25%～70%.

　　 Method two, power off and moisturize. When the uv flatbed printer is not working for a long time, you can choose to moisturize when the power is off, and don't leave the machine in a standby state, so the temperature will rise.

　　Method 3: After turning on the uv flatbed printer every day, be sure to lay down a test strip to check if the nozzle is blocked. The temperature is too high in summer and the ink is easy to dry.

　　 Method 4. Take a week as a unit to clean the inside and outside of the equipment, especially in key positions such as the head and guide rails. Keeping clean is particularly important.

　　 Method 5, the position of the flat wire must be checked every day when the machine is turned on, and timely confirm whether the surface is clean, whether the connection is tight and not loose.