What Are The Main Points Of Daily Maintenance For Uv Flatbed Printers?

1. Turn on the power, confirm the voltage, turn on the main power switch, and confirm that the voltage stabilizer is 220V stable.

2. Power on the machine; turn on the power of the machine, and then turn on the uv power supply.

3. Open the control software; check whether the USB cable connected between the computer and the motherboard is plugged in, and then open the software. At this time, the software will automatically detect the movement of the X, Y, and Z axes of the device. The three "success" means that the device is operating normally.

4. Open the ink valve and confirm the negative pressure; turn the ink valve to a horizontal position to open the valve; then confirm whether the negative pressure is normal.

5. Press the ink and wipe the print head; press the ink button for 2-3 seconds, you can press it several times, and then wipe the ink on the surface of the print head with a dust-free cloth.

6. Print head status; in the control software, determine the print height on the "Head Lift" page, set the print position on the "Print Control" page, and then click "Print Head Status", and the machine will print.

7, confirm that the print head is in good condition; check the status of each print head. If there is no clogging of the print head, no oblique spray is in good condition, and the print head must be kept in good condition every day. If the print head is not in good condition, it needs to be dealt with in time.

8. Production or standby; through the above inspection and observation, the machine can be produced in good condition. If the machine needs to be on standby, please check the "flash spray" state.